Connect with us


DIY Bathroom Renovation: A Step-by-Step Guide



DIY Bathroom Renovation: A Step-by-Step Guide

How much does it cost to renovate a bathroom?

Most people begin and end their days in the bathroom, but this commonly used space is typically overlooked when contemplating home upgrades. When visitors come around, do you feel ashamed about your dated bathroom? Follow these seven stages to upgrading your bathroom, along with some DIY techniques to keep the cost down.

According to Tony Tiling, the overall cost of a bathroom remodelling varies between €10,000 and €25,000, depending on whether the layout or plumbing locations are changed. Labor costs are projected to account for at least 20% of the average budget.

You can expect to save thousands of dollars by doing it yourself, especially when it comes to gutting the bathroom. Other bathroom renovation cost-cutting ideas include minimising the use of expensive materials like tile and refurbishing fixtures rather than buying new.

How to Make a Bathroom Renovation Plan

Choose Design Elements

Choose a design that meets your vision as well as your DIY skill set before you begin remodelling the bathroom. There are several approaches to this job, ranging from repainting and replacing the vanity to completely demolishing the room and beginning again.

Before you start your bathroom makeover, there are a few elements you must get right:

  • Color scheme: Do you want to go for a modern farmhouse look? Or are you seeking for something that will go with the rest of your home’s decor? To ensure that your new bathroom tiles don’t clash with your paint colour, find inspiration photographs for your concept ahead of time.
  • Will you replace your shower or tub with new fixtures? Are you replacing your sink? Replacing one or both of these fittings will extend the schedule and cost of your project.
  • Where will you put your towels and toiletries after the renovation? If you’re expanding a room by removing a closet, make sure you have shelving or cabinets to compensate for the lost storage space.
  • Are you familiar with where the electrical wires and plumbing lines are located? Keep these spots well marked to avoid damaging the hookups and incurring costly repairs.

Gather your resources

There are some useful equipment to have on hand for a bathroom makeover in addition to what you already have in your home repair arsenal.

Bathroom renovation tools and supplies you’ll need:

  1. Mask of protection
  2. Gloves
  3. Goggles
  4. Gun for caulking
  5. Sealant silicone
  6. Hammer
  7. Measurement tape
  8. Knife for spackle
  9. Spackle
  10. locator of studs
  11. Drilling power
  12. Pry bar
  13. Bucket
  14. Chisel
  15. Wrench with adjustability
  16. screwdriver, flathead
  17. Hacksaw
  18. Knife (utility)
  19. Line with chalk
  20. cord extension

We recommend the following optional tools:

If any water leaks when removing the toilet or another fixture, a wet-dry Shop-Vac comes in helpful.

A cordless drill allows you to move more freely while working and frees up your extension cable for other power instruments.

These tools can be rented for a small fee at most home improvement stores. You might even be able to borrow one from a helpful friend or family member.

For more interesting blogs, Please Visit Boundary designs

7 stages to renovating a bathroom

1. Remove all bathroom fixtures.

If you’re doing a partial or complete bathroom renovation, start by removing drywall and any fixtures you’ll be replacing. It’s not difficult to gut the bathroom yourself, but make sure to follow these instructions to avoid costly mistakes during the demolition phase.

Bathroom Renovation Tips:

  • To avoid any unpleasant spills, begin by turning off the water, draining, and removing the toilet.
  • Cover the tub and begin removing the bath tile down to the studs if you’re removing it. This is required in order to alter the plumbing to accommodate your new shower or tub.

Remove the insulation from your walls as needed. When working with insulation, avoid using a hammer. Instead, cut the panels out using a reciprocating saw. To avoid injury, put on a safety mask, gloves, and goggles.

Finally, take out the vanity, cabinets, mirror, flooring, and any other items that you intend to replace. When replacing tile flooring, remove the baseboards and reattach them when your new floor is installed.

Renting a container for your demolition trash will allow you to dispose of everything at once rather than driving to the dump, saving you time and money.

2. Install a new shower or bathtub

You can begin installing your new fixtures after you’ve gutted your bathroom. If your subfloor shows symptoms of rot or water damage, you should fix it before installing your new shower to avoid further damage.

When replacing a shower or tub, choose a pan or basin that complements your new design as well as the space where your present tub sits. Basins are often rectangular, square, or pentagonal in shape (one corner chopped off). When selecting a base shape, remember to consider the other characteristics of your bathroom, such as the location of the door.

If you have the space, you might even add a combination shower and bath tub. While many homeowners prefer walk-in showers, it is advised that at least one tub be kept in the house for resale value.

A DIY bathroom remodelling tip: Adding a walk-in shower to any home is a stunning, space-saving upgrade. Check out this article on how to convert a tub into a walk-in shower if you’re remodelling your bathroom and want to replace your bathtub with a shower stall.

3. Replace the Flooring

You can begin installing your new flooring after preparing your subfloor. While tile is the most popular choice for bathrooms, alternative flooring materials, such as laminate or vinyl, are less expensive and easier to work with.

If you’re going with tile, mark reference lines perpendicular (at a 90-degree angle) to the wall with the longest continuous line with a mason’s chalk line. This will allow you to put your tiles in a straight line as you work your way around the room. More information on how to lay bathroom floor tiles may be found here.

4. Put up the drywall and start painting

The installation of your new drywall is the next phase in your bathroom renovation. Because you must trim the new drywall to fit around your shower walls, vanity, and other fixtures, this can take some time. However, once you begin nailing the boards together, you should be able to complete this task fast.

Here are some crucial DIY bathroom renovation suggestions to remember:

  • Cover seams and fill gaps with drywall mud and tape.
  • For the shower or tub wall, use cement board instead of drywall.
  • To protect the cement board from water damage, apply Redgard or another waterproofing membrane.

After you’ve reassembled your walls, you may begin to add colour to your bathroom. One of the simplest and most cost-effective methods to freshen things up and give your home a whole new look is to paint the walls. It’s ideal to use paint with a semi-gloss finish that’s easy to clean and mould and mildew resistant.

If you plan to retile your shower and tub area while you’re rehanging drywall and painting, now is the time to get started. Check out these helpful hints for tiling bathroom walls or installing a backsplash.

5. Install cabinets and a vanity

You can bring in the vanity, cabinets, and any other significant things left on your bathroom renovation punch list after you’ve finished with the walls.

First, put together the vanity, including the sink and faucet. After you’ve connected the drain to the faucet, you may go on to the other necessities, such as the mirror, cupboards, and shower or tub trim.

Don’t have the funds for a new vanity in your bathroom renovation? You can still save money by renovating the space. To get a brand-new look for less, refinish and paint your old bathroom cabinets and add new hardware.

6. Enhance Lighting

Configure the electrical fixtures and install your new lighting.

You’ll need to alter the wiring and possibly spackle around the existing holes in the wall if their dimensions are different from your current ones.

If your new vanity fills the area differently than your old one, this step may require repositioning the power outlets. You don’t want to be reaching down close to the toilet every day to plug in your hair dryer. This stage should be handled by an electrician, especially if you have never worked with home wiring previously.

7. Connect the Pipes

Except for one thing: the toilet, your bathroom resembles a bathroom at this point in the process. You could reinstall or replace your toilet earlier in the process, but doing it last will assist you prevent chipping it while working on other parts of the bathroom.

Do you have no idea how to replace a toilet? You may get a wonderful guide at Lowe’s.

Finish off your newly remodelled bathroom with some finishing touches.

Finally, you can start decorating by installing the trim around the room. The trim is the finishing touch on any bathroom renovation, as it adds the final touch of detail that makes the room feel finished. Personalize the space with window coverings, stylish storage containers, and wall art. Then relax in a warm bath or shower and appreciate the wonderful area you’ve created!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *


Lawsuit can proceed against Kenosha shooter Kyle Rittenhouse



Lawsuit can proceed against Kenosha shooter Kyle Rittenhouse

MADISON, Wis. (AP) — A federal judge in Wisconsin ruled Wednesday that a wrongful death lawsuit filed by the father of a man shot and killed by Kyle Rittenhouse during a protest in 2020 can proceed against Rittenhouse, police officers and others.

The father of Anthony Huber, one of two men shot and killed by Rittenhouse, filed the lawsuit in 2021, accusing officers of allowing for a dangerous situation that violated his son’s constitutional rights and resulted in his death. Anthony Huber’s father, John Huber, also alleged that Rittenhouse, who was 17 at the time of the shootings, conspired with law enforcement to cause harm to protestors. John Huber is seeking unspecified damages from city officials, officers and Rittenhouse.

U.S. District Judge Lynn Adelman on Wednesday dismissed motions filed by Rittenhouse and the government defendants seeking to dismiss the civil rights lawsuit.

In allowing the case against Rittenhouse and the others to proceed, the judge said that Anthony Huber’s death “could plausibly be regarded as having been proximately caused by the actions of the governmental defendants.”

Rittenhouse attorney Shane Martin said in a phone interview that it’s important to note the ruling doesn’t address the merits of the case, it only allows it to proceed to the next phase.

“While we respect the judge’s decision, we do not believe there is any evidence of a conspiracy and we are confident, just as a Kenosha jury found, Kyle’s actions that evening were not wrongful and were undertaken in self defense,” Martin said.

Attorneys and private investigators for John Huber spent over 100 hours trying to locate Rittenhouse, tracking down addresses in seven states before they found the home of his mother and sister in Florida. The lawsuit was served on Rittenhouse’s sister, who said that he wasn’t home. Adelman said that was sufficient to qualify as being served.

Rittenhouse had argued that the case against him should be dismissed because he wasn’t properly served with the lawsuit. Adelman dismissed that, saying that Rittenhouse “is almost certainly evading service.”

“Rittenhouse has been deliberately cagey about his whereabouts,” Adelman wrote. “Although he denies living in Florida, he does not identify the place that he deems to be his residence.”


Attorneys for the law enforcement and government officials being sued did not immediately return emailed messages seeking comment.

The ruling puts Anthony Huber’s family “one step closer to justice for their son’s needless death,” said Anand Swaminathan, one of the attorneys for parents John Huber and Karen Bloom.

“The Kenosha officials that created a powder keg situation by their actions tried to claim that they cannot be held accountable for their unconstitutional conduct; that argument was soundly rejected today,” Swaminathan said in a statement.

Rittenhouse was charged with homicide, attempted homicide and reckless endangering for killing Anthony Huber and Joseph Rosenbaum and wounding a third person with an AR-style semi-automatic rifle in the summer of 2020 during a tumultuous night of protests over the shooting of a Black man, Jacob Blake, by a white Kenosha police officer.

Rittenhouse was acquitted of all charges in November 2021 after testifying he acted in self-defense. Rittenhouse’s actions became a flashpoint in the debate over guns, vigilantism and racial injustice in the U.S.

Rittenhouse went to Kenosha from his home in nearby Antioch, Illinois, after businesses were ransacked and burned in the nights that followed Blake’s shooting. He joined other armed civilians on the streets, carrying a weapon authorities said was illegally purchased for him because he was underage.

Rittenhouse first killed Rosenbaum, 36, in the parking lot of an auto dealership and as Rittenhouse ran from the scene he stumbled and fell. Anthony Huber, 26, struck Rittenhouse with his skateboard and tried to disarm him. Rittenhouse fell to the ground and shot Anthony Huber to death and wounded demonstrator Gaige Grosskreutz, 27.

This case is one of several ongoing civil lawsuits filed in the wake of the shootings. Grosskreutz last year filed a similar lawsuit against Rittenhouse.

Rittenhouse has maintained a high public profile, particularly on social media, where he is an outspoken advocate for gun rights. He has nearly 1 million followers on Twitter and has spoken at conservative gatherings.

Continue Reading


“Let’s Go Brandon” What does it mean



"Let's Go Brandon" What does it mean

In recent times, the phrase “Let’s Go Brandon” has become quite popular, especially in the United States. It has been used in various contexts, from sports events to political rallies. But what does it actually mean, and how did it become so ubiquitous? In this article, we will explore the origins and significance of the “Let’s Go Brandon” meme.

The phrase “Let’s Go Brandon” first gained national attention during a post-race interview in October 2021 at the NASCAR Xfinity Series race in Alabama. The winner of the race, Brandon Brown, was being interviewed by a reporter from NBC News. In the background, the crowd began to chant “F*** Joe Biden” – a profanity-laced slogan that has become popular among some conservative Americans who are critical of the current President. The reporter, realizing the nature of the chant, attempted to interpret it as “Let’s Go Brandon,” perhaps to sanitize the language for the television audience.

The moment was captured on video and quickly went viral on social media platforms like Twitter and Instagram. Soon after, “Let’s Go Brandon” became a catchphrase among those who opposed Joe Biden and his administration’s policies. The meme has been used in various ways, from t-shirts to hashtags on social media, and has become a symbol of dissent against the President.

So why has “Let’s Go Brandon” caught on so quickly and become such a significant meme? Part of the reason may be its ambiguity. While some people use the phrase explicitly to criticize President Biden, others use it more ironically or humorously, as a way to poke fun at the original misinterpretation. The phrase has become a kind of cultural shorthand, allowing people to signal their political beliefs without necessarily spelling them out in explicit terms.

Another reason for the meme’s popularity may be its simplicity. “Let’s Go Brandon” is easy to remember and easy to say, making it easy to spread through social media and other channels. Additionally, the meme’s lack of specificity means that it can be used in a wide range of contexts, from political rallies to sporting events.

Of course, like any political meme, “Let’s Go Brandon” has also generated controversy. Some have criticized the phrase as disrespectful or vulgar, while others have pointed out that it is a clear example of the kind of polarization and divisiveness that is currently plaguing American politics. However, regardless of one’s opinion on the meme, it is clear that “Let’s Go Brandon” has become a significant cultural phenomenon, one that reflects the current state of American politics and society.

In conclusion, “Let’s Go Brandon” is a political meme that has become popular in the United States as a way for people to signal their political beliefs, particularly those critical of President Biden. The phrase’s origins lie in a misinterpretation of a profanity-laced chant at a NASCAR race, but it has since taken on a life of its own, spreading through social media and other channels. While the meme is controversial and divisive, it is also an intriguing cultural phenomenon that sheds light on the current state of American politics and society.

Continue Reading


Six Reasons Why Your Business Needs a Secure Web Gateway




Six Reasons Why Your Business Needs a Secure Web Gateway

A secure web gateway is essential to any security strategy for your business. It enables organizations to protect employees from online threats while also increasing productivity.

A secure web gateway inspects incoming traffic and checks it against its allowed list, allowing only approved sites to pass. It can also prevent data exfiltration, which occurs when unauthorized information leaves an organization’s site.

Increased Security

Whether you are protecting your company’s internal network, data, or reputation, secure web gateways like those from Versa Networks are necessary. They provide a first defense against malware, ransomware, and other threats.

They can also help prevent data exfiltration, preventing unauthorized information from leaving your network and harming your business.

A secure web gateway acts as an intermediary between your users and the Internet, inspecting each request before allowing it to pass through. It can be software or hardware-based, or cloud-based.

It works similarly to firewalls. They use rules and traffic inspection to identify threats.

Reduced Risk of Data Breach

One of the most significant benefits of having secure web gateway is that it can reduce your risk of a data breach. These gateways are designed to stop hackers from accessing your network and potentially leaking sensitive information, such as credit card numbers or personal information, out into the open.

A secure web gateway (SWG) firewall filters internet traffic at the application level and prevents users from accessing malicious websites and links. These gateways inspect and filter traffic in real-time.

As web traffic passes through the secure web gateway, it’s analyzed and blocked based on policies. This includes URL filtering, advanced machine learning, anti-virus scanning, sandboxing, and data loss prevention. In addition, SWGs often incorporate cloud access security brokers (CASB) and other integrated technologies to improve threat detection and control.

Increased Productivity

A secure web gateway provides an organization real-time web traffic monitoring to ensure it complies with security policies. Using a URL category database, the SWG can determine whether to allow or block content based on company policy.

Another critical feature of SWGs is the ability to decrypt SSL and TLS data before sending it to a user or web server. This allows for a thorough traffic inspection, detecting and preventing malware.

In addition, a secure web gateway can also detect and limit applications employees are accessing to improve productivity and network performance. This can include social networking, instant messaging, and file uploads.

Better Customer Service

A secure web gateway is a virtual proxy between your organization and the Internet that acts as a firewall, a web filter and a content-blocking snooper. It can be a hardware, software or virtual appliance.

Aside from protecting you from phishing and malware, an SWG can also improve employee productivity by giving your team granular control over the websites their employees access. For example, you can restrict users from accessing adult content or prevent employees from spending their work hours on social media.

A secureeb gateway can be found in many forms, including a cloud-based solution that uses the latest encryption technologies like SSL and HTTPS to protect your organization from cyber-attacks. It also has the most powerful content-blocking features to guard against malicious sites and applications. The best part? The gateway can be deployed anywhere and in any configuration to fit your unique needs.

Increased Revenue

If your business sells products online, a secure web gateway can help you increase revenue by reducing the number of transactions your customers need to make. Instead of charging your clients a higher fee each time they purchase, you can only charge them a small percentage.

SWGs can also protect data against malware and other types of security threats circulating on the Internet. Because they inspect all incoming data before passing it on to users, they can prevent many phishing attacks and other types of malware from getting into your network.

This includes enabling them to block threats from popular social networks and instant messaging applications. Those features are essential in sectors such as government, healthcare and retail, where data is often sensitive, and many trusts rely on social media interactions.

Reduced Costs

A secure web gateway (SWG) reduces costs by keeping user devices and access to sensitive data protected from malicious attacks. This helps ensure employee productivity and the integrity of company information.

SWGs can be deployed as software, cloud-based services or physical appliances positioned at the edge of your network. They inspect real-time traffic to ensure it aligns with your security policies.

For example, if you don’t want employees accessing adult content while on your network, an SWG can enforce your policy.

SWGs categorize incoming web traffic, including HTTPS and application names, to enable the enforcement of regulatory requirements like the payment card industry data security standard (PCI) and the European Union’s general data protection regulation (GDPR). This granular control allows you to apply policies to specific data per compliance requirements.

Continue Reading


Copyright © 2022 - Super Hit News. All Rights Reserved.